16-20吨重型柴油叉车

产品概述

12–20 吨超重载内燃平衡重叉车是 VORTEX 内燃产品线的旗舰吨位段，专为港口堆场、大型钢厂、重型制造与重大项目设计。

超加强门架与大缸径举升油缸提供稳定重载能力，湿式制动与重载驱动桥保障恶劣工况下的安全与可靠，整车可按工况定制属具与配置。

内燃平衡重叉车 12–20 吨实车图

核心亮点

旗舰重载 —— 12–20 吨级内燃产品线的旗舰吨位段，为重大项目设计
超加强门架 —— 大缸径举升油缸 + 双链条，重载举升稳如磐石
湿式制动 —— 湿式制动器免调校、抗衰减，恶劣工况更安全
重载驱动桥 —— 行星减速边桥，承载与爬坡能力双优
工况定制 —— 属具与配置可按工况定制，交付即可投产

整车出厂前经过 100% 负载测试，通过 CE 与 ISO 3691 认证；核心部件质保 12 个月或 2000 工时，海外仓常备易损件，24 小时响应。

规格参数

项目	参数
额定载荷	12000 kg（G120）
载荷中心	600 mm
最大起升高度	3000 mm
发动机	玉柴 YCA05115-T480（85 kW）
行驶速度（满载）	23 km/h
最小转弯半径	4300 mm（G120）
整机重量	13900 kg
产品型号	VD1220

适用场景

专为港口堆场、大型钢厂、重型制造与重大项目设计，超重载工况的安全与可靠之选。

Built for Heavy-Duty Material Handling

The G160–200 Series is a 16–20 ton heavy-duty diesel forklift developed for demanding material handling operations. Its reinforced frame is built with high-strength steel to provide excellent structural strength and load-bearing capacity.

The forklift is equipped with a powerful high-pressure common rail engine and a reinforced heavy-duty drivetrain, delivering strong torque and reliable performance under intensive operating conditions.

Designed for handling heavy and oversized loads as well as containers, the G160–200 Series is suitable for factories, ports, terminals, logistics yards and equipment rental fleets.

---------------------------------------------------------------------

"Reinforced Heavy-Duty Frame"

High-strength steel and reinforced structural design provide excellent durability and load-bearing capacity for demanding heavy-duty operations.

"Wide-View Reinforced Mast"

The reinforced mast provides excellent visibility while maintaining the structural strength required for heavy loads. A lowering cushioning function improves load handling smoothness and operator comfort.

"Powerful Common-Rail Engine"

The high-pressure common rail engine delivers strong power and high torque at low engine speed. The DOC + DPF + SCR after-treatment system provides stable and efficient performance.

"Heavy-Duty Drive Axle"

A specially reinforced dry drive axle with strengthened internal gears provides high load capacity and reliable power transmission.

"Advanced Hydraulic System"

The dual-pump hydraulic system with priority steering delivers faster steering response and smoother operation. Pilot hydraulic controls help reduce operator effort.

"Hydraulic Fork Positioner as Standard"

The integrated hydraulic fork positioner enables fork adjustment and side shifting, making it easier to handle cargo of different sizes.

"Full Hydraulic Braking System"

The independent full hydraulic braking system, high-capacity accumulator and disc braking system provide dependable braking performance for heavy-load applications.

"Tiltable Operator Cabin"

The entire cabin can be hydraulically tilted, providing easier access to major components such as the transmission, pumps and valves for maintenance and servicing.

"Comfortable Operator Environment"

The panoramic cabin, suspension seat, adjustable backrest and armrests provide improved visibility and comfort during long working shifts.

"8-Inch LCD Display"

The large LCD display integrates operating information, vehicle status and fault warnings for easier vehicle monitoring and diagnostics.

"Reverse Camera and Radar"

A standard rear-view camera and reversing radar system provide additional assistance when maneuvering the forklift in busy working environments.

---------------------------------------------------------------------------------------------------------------------------------------------------------------

Applications

Ideal for heavy-duty material handling applications including:

Ports & Terminals · Container Yards · Steel Mills · Manufacturing Plants · Logistics Centers · Construction Material Handling · Large Warehouses · Equipment Rental Fleets

BASIC TECHNICAL PARAMETERS
Model		CPCD-G160	CPCD-G180	CPCD-G200
Power Type		Diesel	Diesel	Diesel
Rated Load Capacity	(kg)	16000	18000	20000
Load Center Distance	（mm）	900	900	900
Battery (Voltage/Capacity)	(V/Ah)	24/120	24/120	24/120
PERFORMANCE PARAMETERS
Max. Lifting Height	（mm）	4000	4000	4000
Mast Tilt Angle (Forward/Backward)	(°)	6\12	6\12	6\12
Max. Lifting Speed (Loaded/Unloaded)	（mm/s）	330/390	310/390	260/295
Max. Lowering Speed (Loaded/Unloaded)	（mm/s）	420/350	420/350	265/315
Max. Travel Speed (Loaded/Unloaded)	（km/h）	25/29	25/29	21/29
Min. Turning Radius	（mm）	5180	5180	5180
Gradeability (Loaded/Unloaded)	（%）	20/25	20/20	15/15
Max. Drawbar Pull	kN	110	110	110
Service Weight	(kg)	23600	25400	26500
DIMENSIONS
Length (Without Forks)	（mm）	5690	5690	5690
Width	（mm）	2780	2780	2780
Mast Lowered Height	（mm）	3885	3885	3885
Overhead Guard Height	（mm）	3360	3360	3360
Overall Height with Max. Lift	（mm）	5885	5885	5885
Min. Ground Clearance	（mm）	335	335	335
Wheelbase	（mm）	3800	3800	3800
Front Wheel Tread	（mm）	2080	2080	2080
Rear Wheel Tread	（mm）	2140	2140	2140
Front Overhang	（mm）	1025	1025	1025
Rear Overhang	（mm）	865	865	865
OTHER PARAMETERS
Front Dual Tires		12.00-24-20PR	12.00-24-20PR	12.00-24-24PR
Rear Tires		12.00-20-20PR	12.00-20-20PR	12.00-20-20PR
Forks (Length × Width × Thickness)	（mm）	1820×220×100	1820×220×100	1820×250×100
ENGINES
Model		YCA07175-T400	YCA07175-T400	YCA07175-T400
Rated Power	（kw/rpm）	129/2200	129/2200	129/2200
Max. Torque	(N.m/rpm)	750/1600	750/1600	750/1600
Number of Cylinders		6	6	6
Displacement	(L)	6.87	6.87	6.87

Special Mast Options
2-Stage Full Free Lift Mast	3-Stage Full Free Lift Mast	Wide Fork Carriage
High Load Backrest	Long Forks	Special Forks

Optional Equipment
Suspension Seat	High/Low Overhead Guard	Custom Color	LED Rear Work Light
Panoramic Rearview Mirror	Dual Air Cleaner	Solid Tires	Toolbox
Fire Extinguisher	3/4-Spool Control Valve	High Exhaust System	Cab
Front Windshield (with Wiper)

Optional Attachments
Sideshifter	Paper Roll Clamp	Lifting Jib	Rotating Fork	Rotator	Side-Dumping Forks
Carton Clamp	Fork Extensions	Fork Positioner	Push-Pull	Bale Clamp	Drum Clamp
Load Stabilizer	Sideshifting Fork Positioner	Rotating Clamp	Carpet Pole

16吨 18吨 20吨重型柴油叉车

产品概述

核心亮点

规格参数

适用场景