.png)
.png)
.jpg)
.jpg)
.png)
.jpg)
.jpg)
3.5 吨越野叉车采用大离地间隙底盘与大花纹越野轮胎，抓地力强、通过性好，可在泥地、砂石、坡道等不平地面稳定作业。
两驱/四驱控制切换、先进的操作平台与可靠的液压系统，让它在建筑工地、矿区、木材堆场等户外场景中成为高效搬运主力。
3.5 吨越野叉车 实车图
整车出厂前经过 100% 负载测试，通过 CE 与 ISO 3691 认证；核心部件质保 12 个月或 2000 工时，海外仓常备易损件，24 小时响应。
| 项目 | 参数 |
|---|---|
| 额定载荷 | 3500 kg |
| 最大起升高度 | 3000–4500 mm |
| 离地间隙 | 250 mm |
| 发动机 | 新柴 498 / 潍柴 WP4 |
| 驱动形式 | 2WD / 4WD 可选 |
| 爬坡度（满载） | 30% |
| 产品型号 | RT35 |
建筑工地、砂石料场、矿区与户外堆场等非铺装路面场景的搬运利器。
| 工况 | 表现 |
|---|---|
| 泥泞地面 | 大花纹宽基胎 + 四驱锁止，满载通过不打滑 |
| 坡道作业 | 满载爬坡度 30%，坡道驻车制动双保险 |
| 碎石路面 | 250 mm 离地间隙 + 底盘护板，飞石不伤关键部件 |
| 松软沙地 | 宽基低压胎接地比压低，软地面不陷车 |
二驱经济、四驱强劲，旋钮式切换一秒完成；四驱模式下前后桥扭矩按附着情况自动分配，单轮打滑不误工。
减震座椅 + 小直径方向盘 + 宽视野门架，颠簸路面连续作业疲劳度显著降低；选装驾驶顶棚与防护网，矿区工况更安心。
Q：越野叉车可以上路行驶吗？
越野叉车定位为场（厂）内搬运设备，公路转场建议拖运；场内转移可低速行驶。
Q：四驱版本油耗高多少？
四驱接合时油耗约增加 8–10%，建议按需切换；长期硬路面作业选二驱更经济。
不确定您的场地适合哪种配置？提交现场照片与工况，工程师免费评估。
The S Series rough terrain forklift is built for demanding outdoor working environments where conventional warehouse forklifts may not perform efficiently.
With rated capacities of 2.5 ton, 3.0 ton and 3.5 ton, the series is available in both 2-wheel drive and 4-wheel drive configurations to meet different terrain and operating requirements.
The 2WD version is suitable for relatively firm surfaces such as concrete yards, compacted ground and light-duty outdoor applications,
The 4WD version provides enhanced traction and climbing performance on muddy, gravel, sandy and uneven terrain.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The 2WD rough terrain forklift offers a practical balance between outdoor mobility, operating efficiency and cost.
It is ideal for applications where the ground is relatively firm but conventional warehouse forklifts do not provide sufficient ground clearance or outdoor capability.
Recommended for:
Industrial yards
Warehouses with outdoor loading areas
Logistics centers
Building material yards
Light construction sites
Compacted gravel surfaces
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
The 4WD rough terrain forklift provides improved traction and stability for more demanding working conditions.
Four-wheel drive allows the forklift to operate more effectively on loose, muddy, sandy, wet and uneven surfaces, making it particularly suitable for challenging outdoor applications.
Recommended for:
Construction sites
Farms and agricultural operations
Timber yards
Stone and building material yards
Mining support operations
Equipment rental fleets
Muddy and unpaved working areas
----------------------------------------------------------------------------------------------------------------------------------------------------------
Powered by a reliable diesel engine and equipped with high ground clearance, rough-terrain tires and a strong chassis, the S Series delivers stable performance for construction, agriculture, timber handling, rental fleets and other outdoor material handling applications.
The S Series rough terrain forklift can be widely used in:
Construction · Agriculture · Timber Handling · Building Materials · Stone Industry · Farms · Equipment Rental · Industrial Yards · Outdoor Logistics
|
S25-35 Rough-Terrain Forklift Truck – Technical Specifications |
||||||||
|
BASIC TECHNICAL PARAMETERS |
||||||||
|
Model |
|
|
CPCD-S25B (2WD) |
CPCD-S25A (4WD) |
CPCD-S30B (2WD) |
CPCD-S30A (4WD) |
CPCD-S35B (2WD) |
CPCD-S35A (4WD) |
|
Power Type |
|
|
Diesel |
Diesel |
Diesel |
Diesel |
Diesel |
Diesel |
|
Rated Load Capacity |
|
(kg) |
2500 |
2500 |
3000 |
3000 |
3500 |
3500 |
|
Load Center |
|
(mm) |
500 |
500 |
500 |
500 |
500 |
500 |
|
Battery (Voltage / Capacity) |
|
(V/Ah) |
12/100 |
12/100 |
12/100 |
12/100 |
12/100 |
12/100 |
|
PERFORMANCE PARAMETERS |
||||||||
|
Maximum Lift Height |
H |
(mm) |
3000 |
3000 |
3000 |
3000 |
3000 |
3000 |
|
Free Lift Height |
H3 |
(mm) |
140 |
140 |
145 |
145 |
150 |
150 |
|
Mast Tilt Angle (Forward / Backward) |
α/β |
(°) |
10/12 |
10/12 |
10/12 |
10/12 |
10/12 |
10/12 |
|
Maximum Lifting Speed (Laden / Unladen) |
|
(mm/s) |
560/600 |
560/600 |
455/480 |
455/480 |
455/480 |
455/480 |
|
Maximum Lowering Speed (Laden / Unladen) |
|
(mm/s) |
540/450 |
540/450 |
450/410 |
450/410 |
450/410 |
450/410 |
|
Maximum Travel Speed (Laden / Unladen) |
|
(km/h) |
20/20 |
20/20 |
20/20 |
20/20 |
20/20 |
20/20 |
|
Minimum Turning Radius |
Ra |
(mm) |
3300 |
3300 |
3300 |
3300 |
3300 |
3300 |
|
Gradeability (Laden / Unladen) |
|
(%) |
15/20 |
40/ |
15/20 |
35/ |
15/20 |
30/ |
|
Service Weight |
|
(kg) |
4490 |
4840 |
4740 |
5090 |
5040 |
5390 |
|
DIMENSIONS |
||||||||
|
Length (Excluding Forks) |
L₀ |
(mm) |
3120 |
3120 |
3125 |
3125 |
3130 |
3130 |
|
Overall Width |
W1 |
(mm) |
1600 |
1600 |
1600 |
1600 |
1600 |
1600 |
|
Mast Height |
H1 |
(mm) |
2290 |
2290 |
2290 |
2290 |
2290 |
2290 |
|
Overhead Guard Height |
H4 |
(mm) |
2260 |
2260 |
2260 |
2260 |
2260 |
2260 |
|
Load Backrest Height |
H13 |
(mm) |
1085 |
1085 |
1310 |
1310 |
1310 |
1310 |
|
Overall Height at Maximum Lift |
H2 |
(mm) |
4075 |
4075 |
4300 |
4300 |
4300 |
4300 |
|
Minimum Ground Clearance |
H5 |
(mm) |
270 |
270 |
270 |
270 |
270 |
270 |
|
Wheelbase |
L1 |
(mm) |
1920 |
1920 |
1920 |
1920 |
1920 |
1920 |
|
Front Track |
W3 |
(mm) |
1250 |
1250 |
1250 |
1250 |
1250 |
1250 |
|
Rear Track |
W2 |
(mm) |
1206 |
1206 |
1206 |
1206 |
1206 |
1206 |
|
Front Overhang |
L2 |
(mm) |
580 |
580 |
585 |
585 |
590 |
590 |
|
Rear Overhang |
L3 |
(mm) |
620 |
620 |
620 |
620 |
620 |
620 |
|
OTHER PARAMETERS |
||||||||
|
Front Tires |
|
|
14-17.5-14PR |
14-17.5-14PR |
14-17.5-14PR |
14-17.5-14PR |
14-17.5-14PR |
14-17.5-14PR |
|
Rear Tires |
|
|
10.0/75-15.3-14PR |
10.0/75-15.3-14PR |
10.0/75-15.3-14PR |
10.0/75-15.3-14PR |
10.0/75-15.3-14PR |
10.0/75-15.3-14PR |
|
Fork (L × W × T) |
L4×W×T |
(mm) |
1220×122×40 |
1220×122×40 |
1220×122×45 |
1220×122×45 |
1220×122×50 |
1220×122×50 |
|
ENGINES CONFIGURATIONS |
||||||||
|
Model |
|
|
Quanchai V29-50V42 |
Quanchai V29-50V42 |
Quanchai V32-50V42 |
Quanchai V32-50V42 |
Quanchai V32-50V42 |
Quanchai V32-50V42 |
|
Rated Power |
|
(kW/rpm) |
36.8/2500 |
36.8/2500 |
36.8/2500 |
36.8/2500 |
36.8/2500 |
36.8/2500 |
|
Maximum Torque |
|
(N·m/rpm) |
170/1800 |
170/1800 |
200/1600-1800 |
200/1600-1800 |
200/1600-1800 |
200/1600-1800 |
|
Number of Cylinders |
|
|
4 |
4 |
4 |
4 |
4 |
4 |
|
Displacement |
|
(L) |
2.9 |
2.9 |
3.2 |
3.2 |
3.2 |
3.2 |
|
Standard Configuration |
|||||||||
|
Full Hydraulic Power Steering |
Adjustable Steering Wheel |
Lift Circuit Speed Limiting Valve |
Two-Stage Wide-View Mast |
Standard Load Backrest |
|||||
|
Pull-Type Parking Brake |
Standard Overhead Guard |
Pneumatic Tires |
Entry Assist Handle |
Hydraulic Oil Dipstick |
|||||
|
Reverse Buzzer |
Two-Spool Multi-Way Valve |
Load Safety Valve |
Lift and Tilt Control Levers |
Multi-Function Instrument Panel |
|||||
|
Standard Forks |
Electric Horn |
Tilt Circuit Self-Locking Valve |
Rain Canopy |
LED Combination Front Lights |
|||||
|
USB Charging Port |
Anti-Slip Entry/Exit Step |
On-Board Tool Kit |
|
|
|||||
|
Special Options for Mast |
|||||||||
|
Two-Stage Full Free-Lift Mast |
Three-Stage Full Free-Lift Mast |
Widened Fork Carriage |
Raised Load Backrest |
Extended Forks |
Special Forks |
||||
|
Optional Configuration |
||
|
Suspension Seat |
High/Low Overhead Guard |
Front Windshield (with Wiper) |
|
Fire Extinguisher |
3-/4-Spool Multi-Way Valve |
LED Rear Work Light |
|
Operator Cab |
Toolbox |
Customer-Specified Color |
|
Optional Working Devices |
|||
|
Side Shifter |
Paper Roll Clamp |
Rotating Clamp |
Rotating Fork |
|
Load Stabilizer |
Fork Extensions |
Drum Clamp |
Bale Clamp |
|
Carton Clamp |
Fork Positioner |
Push-Pull |
Tipping Fork |
|
Side-Shifting Fork Positioner |
Carpet Pole |
Crane Boom |
Rotator |
|
ENGINE OPTIONS |
||||||
|
Model |
Unit |
Xinchai A498BPG |
Xinchai 3E22Y_G498 |
Kubota V2403 |
Isuzu 4JG2 |
Yanmar 4TNE98 |
|
Rated Power |
(kW/rpm) |
45/2500 |
44.8/2400 |
42.6/2400 |
46/2450 |
42.1/2300 |
|
Maximum Torque |
(N·m/rpm) |
193/1675_1875 |
185/1600_1800 |
198.5/1600 |
184.7/1700 |
177.6_196.3/1700 |
|
Number of Cylinders |
|
4 |
4 |
4 |
4 |
4 |
|
Displacement |
(L) |
3.2 |
2.23 |
2.4 |
3.059 |
3.3 |
